The typical length of the boards in the bundle is shown with the average length. The specific length of the boards in the nested bundle is not guaranteed.
We supply standard plank floors per the following specifications:
- Unfinished
- Square edge(no bevel)
- Select and Better Grade. Please call or email for other grades.
- T&G (tongue and groove)
- 3/4" thickness. 5/8" option is available in engineered 2-ply construction.
- Solid or Engineered .
Lead time for custom milled boards varies and typically longer for wide ( over 6") and longer length boards. You may expect about 3-6 weeks lead time for most flooring. Lead time and material availability change daily and are confirmed at the time of the order.
Hardwood plank flooring, custom milled by Czar Floors, exceeds NOFMA and NWFA specifications. Our Select grade is similar to Clear Grade specified by NOFMA and NWFA. Czar Floors' boards are produced on German-made precision molders with human and machine inspection for knots and sap.
All planks are back-channeled. Moisture content is between 6.5% and 8.5% and not more than 9% in any single board. Tolerance for dimensional deviation is not exceeding .005” in the width or profile of any single piece. Czar Floors white oak is the best quality Appalachian white oak.
Solid Quarter or Rift sawn oak is a perfect choice for radiant heat flooring, due to its long successful history of use over radiant heated floors. Radiant floor heating, using solid quartersawn oak flooring, has always been a good selection for stability, especially when installing boards wider than 4 inches. With any floors - radiant or not - Rift/Quartered sawn oak would be the best choice and superior to plainsawn for a small increase in investment.
Hardwood floor planks can be used to fill the areas between borders and walls with parquet installed inside the borders. This will create the beautiful appearance of a "wooden rug".
Czar Floor can supply quality plank flooring at competitive prices. The benefit of ordering plank floor from the same source as your parquet, herringbone, medallions and borders is that you can insure that it will match in thickness and appearance to other decorative floor.
Please account for waste of at least 10%. You may estimate the quantity by using our on-line Flooring Calculator . The flooring is sold in full bundles. The actual shipping quantity is automatically recalculated and rounded up to full bundles. After entering the required quantity, please click anywhere on the page or hit "Tab" to see the updated shipping quantity and total material cost. If ordering with parquet or herringbone, there is no minimum - please call to order.
